A Cloud In TheSky

User Tools

Site Tools

You are here: A Cloud in The Sky » Building Automations » Best Practice » Room control
bms:bestpractice:roomcontrol:headpage

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
bms:bestpractice:roomcontrol:headpage [2022/02/15 19:52] – mkbms:bestpractice:roomcontrol:headpage [2022/02/15 19:53] (current) – [PID Regulator] mk
Line 1: Line 1:
-==== Room control ====+===== Room control =====
  
 Controlling the environment in a room can be tricky. Often it's based on an economic viewpoint. Controlling the environment in a room can be tricky. Often it's based on an economic viewpoint.
Line 6: Line 6:
 I will try explaining "Best Practice" or "Ideas of best practice" below with increasing advancements. I will try explaining "Best Practice" or "Ideas of best practice" below with increasing advancements.
  
-=== Room control Heat ===+==== Room control Heat ====
  
 Simplest automation, is a room temperature sensor controlling room heating. Simplest automation, is a room temperature sensor controlling room heating.
 Heat setpoint at 23 °C, and when room temperature gets below this setpoint, you can start regulation your heat option. Heat setpoint at 23 °C, and when room temperature gets below this setpoint, you can start regulation your heat option.
  
-=== Regulation types ===+==== Regulation types ====
 Regulators can be a difficult subject that requires a comprehensive explaination. Regulators can be a difficult subject that requires a comprehensive explaination.
 For now I'll just explain 2 types. For now I'll just explain 2 types.
  
-== Control curve ==+=== Control curve ===
  
 Control curves can be 2 points and upwards (Often no more then 10 points) Control curves can be 2 points and upwards (Often no more then 10 points)
Line 25: Line 25:
 </gchart> </gchart>
  
-== PID Regulator ==+ 
 + 
 +\\ 
 +\\ 
 + 
 +\\ 
 +=== PID Regulator ===
  
 Please visit the [[bms:guides:pid|PID guide]] in guides section Please visit the [[bms:guides:pid|PID guide]] in guides section
  
-=== Sensors explained ===+==== Sensors explained ====
  
 A sensor is basically anything inbound information, from temperature to light status. A sensor is basically anything inbound information, from temperature to light status.
Line 43: Line 49:
 </WRAP> </WRAP>
 <WRAP clear></WRAP> <WRAP clear></WRAP>
 +
 +
 +\\
 +\\
 +\\
 +\\
  
 ~~DISCUSSION~~ ~~DISCUSSION~~
bms/bestpractice/roomcontrol/headpage.1644951147.txt.gz · Last modified: 2022/02/15 19:52 by mk

Page Tools