A Cloud In TheSky

User Tools

Site Tools

You are here: A Cloud in The Sky » Niagara » Programming » PID
c_niagara:programming:pid

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

c_niagara:programming:pid [2022/03/15 07:16] – created mkc_niagara:programming:pid [2022/04/08 08:05] (current) – mk
Line 5: Line 5:
 In Niagara specifically, there is a BIAS setting in the kitcontrol:looppoint, it's only used when you use a P regulator, because the I constant do the function instead. In Niagara specifically, there is a BIAS setting in the kitcontrol:looppoint, it's only used when you use a P regulator, because the I constant do the function instead.
  
-P = Bias at 50 +  * P = Bias at 50 
-PI = Bias at 0 +  * PI = Bias at 0 
-PID = Bias at 0+  * PID = Bias at 0
  
 [[https://www.niagara-community.com/s/article/kitControlLoopPoint21|See guide at community]] [[https://www.niagara-community.com/s/article/kitControlLoopPoint21|See guide at community]]
c_niagara/programming/pid.txt · Last modified: 2022/04/08 08:05 by mk

Page Tools